Ignorer et passer au contenu
Black Friday Weekend Special
Extra Savings, Extra Gifts & Premium Service
00 DAYS
:
00 HRS
:
00 MINS
:
00 SECS
AEKEAEKE
AEKE Heart Rate Armband Not Tracking? Check Power and Pairing

AEKE Heart Rate Armband Not Tracking? Check Power and Pairing

If your AEKE heart rate armband isn't tracking, start with two things: make sure it's charged and powered on, then pair it again using the instructions for your exact gym. Don't trust heart-rate readings or alerts until a live value shows on the screen. The steps below come from the AEKE K1 user manual, so they apply to the K1 Smart Home Gym only.

A missing heart-rate reading is a problem with the armband and its connection. It doesn't tell you anything about the machine's resistance. Treat the two as separate issues, and work through the armband checks first.

Check Power and Pair the AEKE K1 Armband

The steps below follow the AEKE K1 user manual. Do them in order, because the armband needs power before the K1 can find it.

A person taps controls on a touchscreen mounted on exercise equipment.

  1. Charge it before first use. The manual says the armband needs a charge before you use it for the first time. Use the charging cable that came with it and a DC 5V power adapter.
  2. Read the charging lights. While the armband charges, red and green lights flash in turn. When the green light stays steady, the armband is fully charged and you can unplug it.
  3. Turn the armband on. Press and hold the power button on the armband until the LED flashes green.
  4. Open Bluetooth on the K1. Swipe down from the top of the K1 mirror screen and tap the Bluetooth icon.
  5. Select the armband. A connection window opens. Choose the current Heart Rate Armband to connect.

If the armband doesn't appear in the connection window, go back to step 3. Check that the LED is flashing green, which means the armband is on, then open the Bluetooth menu again.

These steps are written for the K1 only. If you use a different AEKE model or an app, use the official instructions for that setup. Our AEKE Support Center links to the user manuals for the S1 Pro and the K1. A manual being listed there doesn't confirm that a particular model works with the armband. Check the manual for your model for compatibility and pairing steps.

Confirm Live Heart-Rate Data Before You Rely on It

Choosing the armband in the Bluetooth menu doesn't prove tracking has started. You need to see actual heart-rate data. The K1 manual gives three things to check:

  • Wear it in the right spot. Put the armband on your upper arm, close to the inner elbow. The optical sensor on the armband reads your heart rate from your skin.
  • Watch the screen. The manual says your heart rate should appear within 15 seconds of putting the armband on.
  • Watch the LED. When the armband picks up valid heart-rate data, the green light changes from fast flashing to slow flashing.

These signs show that data is coming in at that moment. They don't guarantee that the connection will stay steady for the whole workout. If you see a number on the screen and the light is flashing slowly, tracking has resumed.

Man using a cable resistance machine in a modern gym, viewed from behind

Wait for both signs before you start a workout that depends on heart-rate data. One of our accessory guides explains that the K1 uses armband data for safety vibration alerts when your heart rate goes above your overload threshold. Guided workouts can also end early if heart-rate requirements aren't met. Without live data, neither feature has accurate input to work from.

If the K1 Still Does Not Show Heart-Rate Data

First, check whether the armband is still on. The manual says the armband turns off automatically when it detects no heart-rate data for over 90 seconds. That can happen while you're setting up, adjusting the fit or taking a break. If the LED is dark, press and hold the power button again, then confirm it's connected on the K1 screen. The shutoff tells you the armband is off. It doesn't tell you why no data came through.

Keep this separate from the machine's resistance. A missing heart-rate value doesn't mean the resistance is faulty, and the armband checks above don't test resistance at all. Don't assume a hardware cause from the missing reading alone.

If you've charged the armband, turned it on, paired it, worn it in the right spot and still see no reading, the cause is still unknown. That's the time to contact us. The K1 manual lists support@aeke.com as the support email. Tell us your gym model, what the LED is doing and which steps you've already tried. If you use another AEKE model or an app, check the matching manual on the Support Center before you repeat any of the K1 steps.

FAQs

Why is my AEKE heart rate armband not syncing with the smart gym?

The supplied material doesn't confirm a single cause. On the K1, start with the basics. Check that the armband is charged and turned on, with the LED flashing green. Then select the current Heart Rate Armband from the Bluetooth window on the mirror screen. Last, confirm that a heart-rate value appears within 15 seconds.

How do I know my armband is fully charged?

The K1 manual says red and green lights flash in turn while the armband charges. A steady green light means it's fully charged and you can stop charging.

Why did my armband turn off by itself?

The armband turns off automatically when it detects no heart-rate data for over 90 seconds. Turn it back on with a long press of the power button, then check the connection.

Does missing heart-rate data mean my K1's resistance is broken?

No. Heart-rate tracking and resistance are separate. A missing reading only tells you that the armband isn't sending data, so troubleshoot the armband on its own.

Can I use the K1 pairing steps with another AEKE gym or an app?

Don't assume they'll work. These steps come from the K1 manual. For any other setup, use that setup's official instructions, which you can find through our Support Center.

Panier 0

Votre carte est actuellement vide.

Commencer à magasiner