The S1 Pro can work in a low-ceiling room if the lowest point over your workout spot is at least 86.6 inches high. That's our listed training height. The 72.8-inch folded height only tells you whether the machine fits in storage.
Passing that number is only a static check. Your final answer also depends on the moves you plan to do, because your hands and any attachment may rise higher than the machine itself.
How Much Vertical Clearance Does the S1 Pro Need?
For training, use 86.6 inches (2,200 mm). That's the listed height of our AEKE S1 Pro home gym when the arms are extended. The folded figure is lower, so it can make a room look tall enough when it isn't.

| Configuration | Listed height | What it tells you |
|---|---|---|
| Folded (storage) | 1,850 mm (about 72.8 in) | Whether it fits in storage |
| Training | 2,200 mm (about 86.6 in) | The static check for workouts |
If your spot measures under 86.6 inches, it's below the listed training height. If it measures 86.6 inches or more, the room passes this static check. It doesn't yet prove there's room for every exercise. People shopping for home gym equipment for small spaces often look at folded height first. With a low ceiling, the training height is the number that decides whether you can work out there.
Measure the Lowest Point Over the Workout Area
Measure where you'll actually train, not at the most open part of the room. A beam, duct, light fixture, or ceiling fan over the machine can sit well below the ceiling a few feet away. As explained in a home gym ceiling clearance guide, a clearance measurement is only valid for the specific spot where you take it.
- Mark the workout area. Outline where the machine will stand in its training position and where you'll stand to use it.
- Find the lowest obstruction. Measure straight up from the finished floor surface to the lowest thing overhead in that area. On a sloped attic or bonus-room ceiling, take readings at several points, because the height drops toward the eaves.
- Compare the result with 86.6 inches. If it's lower, the spot is below the listed training height, so try another location. If it's equal or higher, the spot passes the static check. Move on to your planned exercises.
Write down the lowest reading, not the average. One low light fixture is enough to change the answer.
Check the Moves You Plan to Do
Clearing 86.6 inches covers the machine's listed size, but it does not guarantee clearance for every exercise. Overhead space needs change depending on the movement you perform.
For example, a standing press can need more room than a seated or kneeling version of the same move, while jumping lifts your entire body higher.

The listed dimensions don't include an exercise-by-exercise overhead margin. That means you'll need to check your own routine. Stand at the workout spot and slowly go through each move you plan to train. Watch for the highest point your hands, head, and any attachment reach. If a standing overhead move gets close to a beam or light, switch to a seated or kneeling version instead of accepting a near miss every session. Plan around the tallest move you'll actually do, not the average one.
For a step-by-step way to mark floor space and movement paths, see our guide on how to measure exercise clearance. If floor space is also tight, our compact home gym layout ideas cover planning for living rooms, bedrooms, and home offices.
FAQs
Does the S1 Pro need more floor space when it's set up for training?
Yes. Our listed training dimensions are 1,600 mm wide by 1,800 mm deep (about 63 by 70.9 inches). Folded, it's 715 by 425 mm (about 28.1 by 16.7 inches). Plan your floor area around the training footprint, not the folded footprint.
Can I store the S1 Pro in a room that's too low for training?
The folded height is 72.8 inches, so a storage spot only needs to clear that. If you plan to roll it to a taller spot for workouts, measure that second location against the 86.6-inch training height too.
Is 86.6 inches the same as the ceiling height I need?
No. It's the listed height of the machine in its training position. The ceiling you need also depends on your height and the moves you do, and the specs don't add a fixed safety margin. Check the overhead path of your tallest move at the actual spot.
Where can I find the full S1 Pro specs?
Our S1 Pro support FAQ covers hardware specs along with warranty, shipping, and returns, so you can check the details before setup.
